SMX Pessral Modules include: SMX 10P, SMX 11P
i
SMX 10P
Free programmable compact-type safety control without Safe Motion (PESSRAL)
- 14 safe digital inputs
- 2 safe digital outputs
- 1 safe relay output
- 2 clock / auxiliary output
- Safety control suitable up to PL e (EN ISO 13849-1) / SIL3 (IEC 61508), use as PESSRAL acc. to DIN EN 81-20/50:2014
- optional: safe/non-safe fieldbus interface
Characteristic of the module
- Extendable up to:
- max. 42 safe digital inputs
- max. 12 safe digital outputs
- max. 20 safe digital I/O‘s
- max. 11 safe relay outputs
- max. 10 auxiliary outputs
- Logic processing up to PL e acc. to EN ISO 13849-1 or SIL 3 acc. to IEC 61508
- Free programmable small controller for up to 800 AWL instructions
- Functionplan oriented programming via SafePLC²
- Pulse outputs for cross-shorting detection of digital input signals
- External contact monitoring of connected switchgear (EMU)
- Monitored relay outputs for safety relevant functions
- Switchable safe semi-conductor outputs pn-, pp-switching for safety-relevant functions
- Comprehensive diagnostics functions integrated
- Parameter management for expansion modules in base device
- Status monitoring by coded 7-segment-display and status LEDs
- Multifunction buttons (quit, start, reset) can be operated from the front side
- Configurable via SafePLC² Seriel USB-adapter or Ethernet-based fieldbus
- Optional: expandable with communication module (SMX5x):
- Standard and safe field bus protocols for communication with a higher level controller
(PROFIBUS, PROFINET, DeviceNet, CANopen, CAN2.0, EtherCAT) - Field bus protocols with the same hardware can be switched with SafePLC²
- Safe remote I/O communication for data exchnage with distrubted I/O systems
- Standard and safe field bus protocols for communication with a higher level controller
- CAN-Communication in connection with the SMX5x for diagnostics via backplane bus assembly on hat rail
- The mechanical construction of the SMX10P (/5x*) is dependent on the respective forms of the base module
* Optional: expandable with communication modules:
SMX51 CAN2.0 / SMX52 PROFIBUS / SMX53 PROFINET / SMX54 CANopen / SMX 55 EtherCAT
Downloads
|
SMX 11P
Free programmable compact-type safety controller with Safe Motion (PESSRAL)
- Integrated axis monitoring for 1 axis
- 3 Encoder interface
- 14 Safe digital inputs
- 2 Safe digital outputs
- 1 Safe relay output
- 2 Clock / auxiliary output
- Safety control suitable up to PL e (EN ISO 13849-1) / SIL3 (IEC 61508), use as PESSRAL acc. to DIN EN 81-20/50:2014
- optional: safe/non-safe fieldbus interface
Characteristic of the module
- Extendable up to:
- max. 42 safe digital inputs,
- max. 12 safe digital outputs,
- max. 20 safe digital I/O‘s,
- max. 9 safe relay outputs,
- max. 10 auxiliary outputs,
- max. 1 safe axis
- Logic processing up to PL e acc. to EN ISO 13849-1 or SIL 3 acc. to IEC 61508
- Movement monitoring of one axis up to Pl e EN ISO 13849-1 or SIL 3 acc. to IEC 61508
- Speed monitoring:
- RPM-monitoring
- Standstill monitoring
- Sense of rotation monitoring
- Safe incremental dimension
- Emergency Stop monitoring
- Position monitoring
- Position range monitoring
- Trend range monitoring
- Target position monitoring
- Freely programmable compact-type control for up to 800 IL instructions
- functionplan oriented programming via SafePLC²
- Pulse outputs for cross-shorting detection of digital input signals
- External contact monitoring of connected switchgear (EMU)
- Switchable safe semi-conductor outputs pn-, pp- switching for safety-relevant functions
- Monitored relay outputs for safety relevant functions
- Complete speed and position-based safety functions for drive monitoring in accordance with
IEC 61800-5-2 are integrated in firmware:- Spatial functions for safe speed and are monitoring are possible Comprehensive
diagnostics functions integrated
- Spatial functions for safe speed and are monitoring are possible Comprehensive
- Umfangreiche Diagnosefunktionen integriert
- Parameter management for expansion modules in base module
- Coded status display via front-side 7 segment display and status LEDs
- Multifunction buttons (quit, start, reset) can be operated from the front side
- Configurable via SafePLC² über USB serial adapter or Ethernet based field bus
- Optional: expandable with communication module:
- Standard and safe field bus protocols for communication with a higher level controller
(PROFIBUS, PROFINET, DeviceNet, CANopen, CAN2.0, EtherCAT) - Field bus protocols with the same hardware can be switched with SafePLC²
- Safe remote I/O communication for data exchnage with distrubted I/O systems
- Standard and safe field bus protocols for communication with a higher level controller
- CAN-Communication in connection with the SMX5x for diagnostics via backplane bus assembly on hat rail
- The mechanical construction of the SMX11P (/5x*) is dependent on the respective forms of the base module
* Optional: expandable with communication modules:
SMX51 CAN2.0 / SMX52 PROFIBUS / SMX53 PROFINET / SMX54 CANopen / SMX 55 EtherCAT