Delay modules

You are here:

Specific shut-down of drives

Delay modules from DOLD allow the specific shut-down of the drives which reduces the risk of injury. A typical area of use are high-speed tools that continue to move after shut-down. Productivity is not affected as the machine can be immediately started again. The emergency stop of the dangerous movement can be accelerated through a specific shut-down in accordance with stop category 1 by allowing motor braking functions to be applied during the switch-off delay and/or the speed of the drive can be regulated.

Delay module, release delayed BG 7925

Features

  • Can be used in conjunction with a suitable switchgear / control unit in safety applications as follows:
    – Up to PL d and category 2 according to EN ISO 13849-1
    – Up to SIL 2 according to EN 61508 and EN 61511
  • Variants /_ _2 and /_ _ 3 can be used in conjunction with a suitable switchgear / control unit in safety applications as follows:
    – Up to PL d and category 3 according to EN ISO 13849-1
    – Up to SIL 2 according to EN 61508 and EN 61511
  • Adjustable time delay
  • Long time stability by digital timing circuit
  • With auxiliary voltage
  • 1 timing circuit
  • BH 7925 in dual voltage version
  • BH 7925 optionally for AC 230 V
  • Output: 1 NC contact, 1 NO contact, forcibly guided or 1 NC contact, 3 NO contacts, forcibly guided
  • Indication of state of operation
  • Removable terminal strips
  • Wire connection: also 2 x 1.5 mm2 stranded ferruled (isolated), DIN 46 228-1/-2/-3/-4 or 2 x 2.5 mm2 stranded ferruled DIN 46 228-1/-2/-3
  • Optionally with 2 timing circuits
  • Optionally fixed time delay
  • Optionally without auxiliary voltage on BH 7925
  • Optionally for switching small loads
  • BG 7925: width 22.5 mm
    BH 7925: width 45 mm

Delay module, release delayed BG 7926

Advantages

  • Easy to realise safe timing circuits
  • 5 forcibly guided output contacts at only 22.5 mm width

Features

  • Can be used in conjunction with a suitable switchgear / control unit in safety applications as follows:
    – Up to PL d and category 2 according to EN ISO 13849-1
    – Up to SIL 2 according to EN 61508 and EN 61511
  • Redundant and forcibly guided contacts
  • 1 timing circuit
  • Fixed time delay 1, 2 or 3 sec
  • Without auxiliary supply
  • Output: 5 NO contacts or 4 NO contacts / 1 NC contact, 1 NC contact for feed back circuit
  • Indicator LED for operation
  • Removable terminal strips
  • Wiring diameter: Also 2 x 1.5 mm2 stranded ferruled with sleeve DIN 46228-1/-2/-3/-4 or 2 x 2.5 mm2 stranded ferruled DIN 46228-1/-2/-3
  • Width 22.5 mm

Delay module, on delayed LG 7927

Advantages

  • Easy to realise safe timing circuits
  • 4 forcibly guided output contacts at only 22.5 mm width

Features

  • Can be used in conjunction with a suitable switchgear / control unit in safety applications as follows:
    – Up to PL d and category 3 according to EN ISO 13849-1
    – Up to SIL 2 according to EN 61508 and EN 61511
  • Adjustable time delay
  • As option fixed time delay
  • High long life stability due to digital time base
  • Adjustable with or without cross fault detection
  • Output: 3 NO contacts + 1 NC contact + 1 forcibly guided
  • feedback contact or 4 NO contacts + 1 forcibly guided feedback contact
  • LED indicator for channel 1, 2 and operation voltage
  • Wire connection: also 2 x 1.5 mm2 stranded ferruled, or 2 x 2.5 mm2 solid DIN 46228-1/-2/-3/-4
  • As option with pluggable terminal blocks for easy exchange of devices
    – with screw terminals
    – or with cage clamp terminals
  • Width 22.5 mm

Delay module, release delayed LG 7928

Advantages

  • Easy to realise safe timing circuits
  • 4 forcibly guided output contacts at only 22.5 mm width

Features

  • Can be used in conjunction with a suitable switchgear / control unit in safety applications as follows:
    – Up to PL d and category 3 according to EN ISO 13849-1
    – Up to SIL 2 according to EN 61508 and EN 61511
  • Adjustable time delay
  • As option fixed time delay
  • High long life stability due to digital time base
  • Adjustable with or without cross fault detection
  • Output: 3 NO contacts + 1 NC contact + 1 forcibly guided feedback contact or 4 NO contacts + 1 forcibly guided feedback contact
  • LED indicator for channel 1, 2 and operation voltage
  • Wire connection: also 2 x 1.5 mm2 stranded ferruled, or 2 x 2.5 mm2 solid DIN 46228-1/-2/-3/-4
  • As option with pluggable terminal blocks for easy exchange of devices
    – With screw terminals
    – Or with cage clamp terminals
  • Width 22.5 mm

Delay module, release delayed IL 7824

Features

  • Can be used in conjunction with a suitable switchgear / control unit in safety applications as follows:
    – Up to PL c and category 2 according to EN ISO 13849-1
    – Up to SIL 2 according to EN 61508 and EN 61511
  • BA 7924.21/002 and BA 7924.21/003 can be used in conjunction with a suitable switchgear / control unit in safety applications as follows:
    – Up to PL d and category 3 according to EN ISO 13849-1
    – Up to SIL 2 according to EN 61508 and EN 61511
  • Release delay
  • Without auxiliary voltage
  • Output: 1 NC, 1 NO contacts, forcibly guided
  • Operating state display
  • Optionally with adjustable or fixed time delay up to 30 s
  • Optionally with redundant timing circuit
  • Optionally with 1 or 2 separate timing circuits
  • Optionally also in housing for distribution board
  • Width 45 mm, 35 mm or 52.5 mm

Delay module, Release Delay BA 7924

Features

  • Can be used in conjunction with a suitable switchgear / control unit in safety applications as follows:
    – Up to PL c and category 2 according to EN ISO 13849-1
    – Up to SIL 2 according to EN 61508 and EN 61511
  • BA 7924.21/002 and BA 7924.21/003 can be used in conjunction with a suitable switchgear / control unit in safety applications as follows:
    – Up to PL d and category 3 according to EN ISO 13849-1
    – Up to SIL 2 according to EN 61508 and EN 61511
  • Release delay
  • Without auxiliary voltage
  • Output: 1 NC, 1 NO contacts, forcibly guided
  • Operating state display
  • Optionally with adjustable or fixed time delay up to 30 s
  • Optionally with redundant timing circuit
  • Optionally with 1 or 2 separate timing circuits
  • Optionally also in housing for distribution board
  • Width 45 mm, 35 mm or 52.5 mm

Delay module, release delayed BH 7925

Features

  • Can be used in conjunction with a suitable switchgear / control unit in safety applications as follows:
    – Up to PL d and category 2 according to EN ISO 13849-1
    – Up to SIL 2 according to EN 61508 and EN 61511
  • Variants /_ _2 and /_ _ 3 can be used in conjunction with a suitable switchgear / control unit in safety applications as follows:
    – Up to PL d and category 3 according to EN ISO 13849-1
    – Up to SIL 2 according to EN 61508 and EN 61511
  • Adjustable time delay
  • Long time stability by digital timing circuit
  • With auxiliary voltage
  • 1 timing circuit
  • BH 7925 in dual voltage version
  • BH 7925 optionally for AC 230 V
  • Output: 1 NC contact, 1 NO contact, forcibly guided or 1 NC contact, 3 NO contacts, forcibly guided
  • Indication of state of operation
  • Removable terminal strips
  • Wire connection: also 2 x 1.5 mm2 stranded ferruled (isolated), DIN 46 228-1/-2/-3/-4 or 2 x 2.5 mm2 stranded ferruled DIN 46 228-1/-2/-3
  • Optionally with 2 timing circuits
  • Optionally fixed time delay
  • Optionally without auxiliary voltage on BH 7925
  • Optionally for switching small loads
  • BG 7925: width 22.5 mm
    BH 7925: width 45 mm

Delay module, release delayed IN 7824

Features

  • Can be used in conjunction with a suitable switchgear / control unit in safety applications as follows:
    – Up to PL c and category 2 according to EN ISO 13849-1
    – Up to SIL 2 according to EN 61508 and EN 61511
  • BA 7924.21/002 and BA 7924.21/003 can be used in conjunction with a suitable switchgear / control unit in safety applications as follows:
    – Up to PL d and category 3 according to EN ISO 13849-1
    – Up to SIL 2 according to EN 61508 and EN 61511
  • Release delay
  • Without auxiliary voltage
  • Output: 1 NC, 1 NO contacts, forcibly guided
  • Operating state display
  • Optionally with adjustable or fixed time delay up to 30 s
  • Optionally with redundant timing circuit
  • Optionally with 1 or 2 separate timing circuits
  • Optionally also in housing for distribution board
  • Width 45 mm, 35 mm or 52.5 mm

For all your automation project needs:

Get in touch with us today!