Tilt Sensors

You are here:
  1. Home
  2. ELOBAU Products
  3. Tilt Sensors

Products:

 

Tilt sensor N6 static CAN 

tinywow_19-0156v21_deutsch_v02_2000x2000-960x960_71800551
  • High precision in (quasi-)static systems or with slow machine movement
  • Inclination range single axis ±180° / double axis ±90°/±180°
  • Various software filters available for precise output signals
  • EMC standards in accordance with off-highway standards (EN ISO 14982; DIN EN ISO 13766-1; DIN EN 12895)
  • Robust design for long service life: protection class IP6K7 (ISO 20653) / IP6K9K (ISO 20653)
  • Operating range -40 °C to +85 °C
  • Connector types: Deutsch DT04-08PA, 1x M12 5-pin (male) or 2x M12 5-pin (male/female)
  • Daisy-Chain – Looping through the CAN signal without additional T-distributors
  • Fast installation thanks to efficient 2-point mounting
  • Smart variant management thanks to a clever modular system
  • E1 type approval for road approval
  • Parameter sets customised to the application to increase performance/accuracy (on request)

The tilt sensor N6 static is available in the variants 4-20 mA, 0.5-4.5 V, CANopen, SAE J1939. Due to its robust design and high resistance to shock and vibration, it is often used to measure inclination in construction machinery, agricultural machinery, industrial trucks and harsh industrial environments.

N6 static – developed for even higher safety, reliability, functionality and flexibility.

Product Datasheet

Tilt sensor N7 dynamic CAN

tinywow_19-0156v21_deutsch_v02_2000x2000-960x960 (1)_71801305
  • High precision, even with fast movements, strong vibrations and shocks
  • Inertial Measurement Unit (IMU)
  • Output of acceleration, rotation rate and inclination
  • Precise signals for dynamic movements thanks to sensor fusion
  • EMC standards in accordance with off-highway standards (EN ISO 14982; DIN EN ISO 13766-1; DIN EN 12895)
  • Robust design for a long service life: protection class IP6K7 (ISO 20653) / IP6K9K (ISO 20653)
  • Temperature-resistant from -20 °C to +85 °C (-40 °C to +85 °C on request)
  • Connector types: Deutsch DT04-08PA, 1x M12 5-pin (male) or 2x M12 5-pin (male/female)
  • Daisy-Chain – Looping through the CAN signal without additional T-distributors
  • Fast installation thanks to efficient 2-point mounting
  • Smart variant management thanks to a clever modular system
  • E1 type approval for road approval
  • Parameter sets customised to the application to increase performance/accuracy (on request)

The N7 dynamic tilt sensor is available in CANopen or SAE J1939 versions. Due to its robust design and high resistance to shock and vibration, it is often used to measure inclination in construction machinery, agricultural machinery, industrial trucks and harsh industrial environments. Enhanced with a highly responsive blend of accelerometer and gyroscope, this combination effectively minimizes the impact of abrupt movements, guaranteeing the delivery of accurate measurement data.

N7 dynamic – developed for even greater safety, reliability, functionality and flexibility.

Product Datasheet

Tilt sensor N6 static analogue

tinywow_19-0156v21_deutsch_v02_2000x2000-960x960 (2)_71801413
  • High precision in (quasi-)static systems or with slow machine movement
  • Inclination range single axis ±180° / double axis ±90°/±180°
  • Various software filters available for precise output signals
  • EMC standards in accordance with off-highway standards (EN ISO 14982; DIN EN ISO 13766-1; DIN EN 12895)
  • Robust design for long service life: protection class IP6K7 (ISO 20653) / IP6K9K (ISO 20653)
  • Operating range -40 °C to +85 °C
  • Connector types: Deutsch DT04-08PA, 1x M12 5-pin (male) or 2x M12 5-pin (male/female)
  • Fast installation thanks to efficient 2-point mounting
  • Smart variant management thanks to a clever modular system
  • E1 type approval for road approval
  • Parameter sets customised to the application to increase performance/accuracy (on request)

The tilt sensor N6 static is available in the variants 4-20 mA, 0.5-4.5 V, CANopen, SAE J1939. Due to its robust design and high resistance to shock and vibration, it is often used to measure inclination in construction machinery, agricultural machinery, industrial trucks and harsh industrial environments.

N6 static – developed for even higher safety, reliability, functionality and flexibility.

Product Datasheet

Tilt sensor N3

tinywow_n3aa-perspective-2_change-1-960x960_71801471
  • Long service life and reliability thanks to the mechanics-free MEMS technology
  • The analogue output signals can be combined
    with additional switching points
  • Tilt range up to ±60°
  • IP67 protection class
  • Operating range from -40 °C to +70 °C
  • Analogue current or voltage output, or volt free switching output via relay
  • Depending on the angle, resolution up to ≤ 0.04°
  • Adjustment of the neutral position possible
    through remote control
  • Selectable switch-on and switch-off delay at the
    switching output

The robustly designed N3 tilt sensor has a high impact and vibration resistance so is frequently used for tilt measurement in construction machinery, industrial trucks and adverse industrial environments. The N3 tilt sensor also has a high resolution and repeating accuracy. It can be easily programmed and the neutral position adjusted with the corresponding infrared remote control.

Product Datasheet

Tilt sensor N4

tinywow_n3aa-perspective-2_change-1-960x960_71801471
  • Long service life and reliability thanks to the
    mechanics-free MEMS technology
  • The analogue output signals can be combined with additional switching points
  • Tilt range up to ±60°
  • IP67 protection class
  • Operating range from -40 °C to +70 °C
  • Analogue current or voltage output, or volt free
    switching output via relay
  • Depending on the angle, resolution up to ≤ 0.04°
  • Adjustment of the neutral position with
    remote control
  • Selectable switch-on and switch-off delay at the
    switching output

The robustly designed N4 tilt sensor has a high impact and vibration resistance so is frequently used for tilt measurement in construction machinery, industrial trucks and adverse industrial environments. The dual-axis sensor can be easily programmed and the neutral position adjusted with the corresponding infrared remote control.

Product Datasheet

Tilt sensor N5

tinywow_n3aa-perspective-2_change-1-960x960_71801471
  • Long service life and reliability thanks to the mechanics-free MEMS technology
  • Inclination range single axis 360°, or double axis 180°
  • Up to 4 additional, freely configurable switching points
  • Selectable switch-on and switch-off delay per switching point
  • Adjustment of the zero position via CAN bus, or IR remote control
  • Protection class IP67
  • Operating range -40 °C to +85 °C
  • Deutsch or M12 plug
  • Daisy chain – looping through the CAN signal without additional T-distributors
  • Compact, flat and outdoor-suitable housing
  • Stack mounting for redundancy

The N5 tilt sensor with CAN-Bus interface is available as a CANopen or SAEJ1939 variant. It has a high impact and vibration resistance so is frequently used for tilt measurement in construction machinery, industrial trucks and adverse industrial environments. The N5 can be easily programmed and the neutral position adjusted with the corresponding infrared remote control.

Product Datasheet

ELOBAU Product Links

For all your automation project needs:

Get in touch with us today!

Contact us