These ELGO absolute measuring systems are suitable for rotary applications, e. g. measurement of angles or rotational speeds or as bearingless singleturn absolute encoders. Besides the rotary systems listed on this page, the unguided ELGO absolute encoders for linear applications are also suitable for angle measurements.
RMIX2 Incremental Measuring System
Product Overview
RMIX2 Incremental Measuring System Measurement of Lengths, Positions, Angles and Rotational Speed
Datasheet Download
Magnetic rings hard ferrite
Product Overview
Magnetic rings hard ferrite for rotative measurements
- Interpolation up to zu 22.800 pulses/revolution
- Direct assembly on axes possible (e.g. motor shaft)
- Contactless and wear-free measuring principle
- Applicable in roughest environments (IP67)
- Vibration and shock resistant
For the use with ELGO incremental sensors EMIX, LMIX, GMIX und RMIX and the battery-powered measuring and indicator systems IZ14, IZ15, IZ16
Pole length 5 mm for GMIX und LMIX sensors
Pole length2 mm for higher resolution EMIX sensors and RMIX sensor
Pole length 2.5 mm for IZ14, IZ15, IZ16
Datasheet Download
Elastomer-based magnetic-rings
Product Overview
Elastomer-based magnetic-rings radial and axial versions in different diameters
Magnetic pole rings in conjunction with the appropriate sensor technology are used wherever rotary movements, such as angular positions and speeds on axes and drives, have to be detected, monitored and controlled. The magnetic scanning principle is not only non-contact, wear-free and low-maintenance, it is also extremely robust under extreme environmental conditions. Since the complete system is bearing free, mechanical influences do not directly affect the entire sensor.
- Incremental or absolute magnetic rings
- In radial (MRR) or axial (MRA) design
- Thanks to protection class IP68 predestined for outdoor use
- Resistant to thermal, chemical and mechanical influences
The incremental rings can be combined with the CMIX, EMIX, LMIX and RMIX series as well as the battery-operated measuring and display systems of the IZ series
| pole length 2 mm | CMIX3, EMIX1X, EMIX1/2, EMIX23, EMSC1/2, RMIX2 |
| pole length 2,5 mm | IZ14E, IZ15E, IZ16E, IZ17E |
| pole length 5 mm | PLMIX, LMIX1/2, LMIX22, LMSC1/2 |