Available with operating voltages from 12 VAC/DC to 230VAC.
11-pin plug-in housing.
Relay/logic output.
Light/dark function.
LED indication.
Timer ON/OFF, adjustable between 0 and 10 sek.
Also for print installation.
|
|
11 Pin Plug In Photocell Amplifier
Technical Specification for:
OA 721 - Relay Output
The OA 721 is applicable with all transmitters/receivers operating with separate amplifiers.
OA 722 - Relay & Solid State Output
The OA 722 is applicable with all transmitters/receivers operating with separate amplifiers.
OA 823 - Relay & Solid State Output - On/Off Time Delay
The OA 823 is applicable with all transmitters/receivers operating with separate amplifiers.
OA 727 - 2 Channel Multiplex - Relay Or Solid State Output
The OA 727 is applicable with all transmitters/receivers operating with separate amplifiers.
Supply options:
|
230, 115VAC, 24, 12VAC/DC
|
Power consumption:
|
Ca. 2,8VA
|
-Relay:
|
250VAC, 8A, 2000VA
|
Output
|
|
-Solid state:
|
NPN or PNP 50mA 30VDC
|
Modulations Freqency:
|
App. 7,5KHz.
|
Response time:
|
Typ. 35msek.
|
Ambient temperature:
|
-20°C to +55°C
|
Housing:
|
Noryl
|
PCB Mouning
Photocell Amplifier
Technical Specification for:
OA 793 - Solid State Output
The OA 793 is applicable with all transmitters/receivers operating with separate amplifiers.
Supply options:
|
24VDC, -10% til 15%
|
Power consumption:
|
Max. 35mA
|
Output:
|
NPN/PNP transistor open kollektor 50mA max.
|
Modulations Freqency:
|
4 til 6KHz
|
Ambient temperature:
|
-20°C to +55°C
|
Dimension:
|
L55,5 x W40,5 x H113,5mm
|
Terminal Block Connection
Photocell Amplifier
Technical Specification for:
OA 9214 - Relay Output
The OA 9214 is applicable with all transmitters/receivers operating with separate amplifiers.
OA 9039 - Solid State Output
The amplifier operates on a phase and frequency synchronised principle based on a PLL syatem. LED indication of "beam on" and potentiometer for gain control adjustment. The OA 9039A type has no ajustment option (automatic gain control). The amplifier has board terminal blocks for connection of transmitter and receiver and Molex-connector for supply and PNP - output (also available with board terminal blocks).
OA 9039A - Solid State Output - Automatic Gain Control
The amplifier operates on a phase and frequency synchronised principle based on a PLL syatem. LED indication of "beam on" and potentiometer for gain control adjustment. The OA 9039A type has no ajustment option (automatic gain control). The amplifier has board terminal blocks for connection of transmitter and receiver and Molex-connector for supply and PNP - output (also available with board terminal blocks).
OA 9420 - 4-Channel Multipex - Relay Or Solid State Output
The OA 9214 is applicable with all transmitters/receivers operating with separate amplifiers.
OA 9810 - 2-Channel Amplifier For Seat Control In Taxies
The OA 9810 is a 2-channel opto-electric amplifier for passenger seat control in taxies. The amplifier is designed to operate with two sets of thru-beam photo cell units i.e. with transmitter and receiver in face to face setup.
OA 9504 - Amplifier Operating With A Magnetic Valve
The OA 9505 is an opto-electric amplifier specially designed to operate with a magnetic valve and an opto-reflex sensor detector.
Response time: approx. 50ms. The amplifier operate on a phase and frequency synchronised principle based on a PLL system ensuring high immunity to ambient light.
Supply options:
|
24VAC/DC 15% at AC: 45-65Hz
|
Power consumption:
|
<75mA
|
Output:
|
1 changeover 125VAC, 2A, 250VA
|
Modulations frekvens:
|
Ca. 7,5KHz
|
Ambient temperature:
|
-20°C to +60°C
|
Dimension:
|
L100 x B50,5 x H24mm
|
|