| Brand | ELOBAU |
|---|---|
| Order number | 485EPB |
You are here:
ELOBAU eloProg base modules Standard
- Brand
- ELOBAU
- Part number
- 485EPB
- Order number
- 485EPB
8 safety inputs
- 8 safety inputs and 2 solid-state safety output pairs (4 outputs) enable use as a stand-alone device
- 4 test outputs for sensor monitoring
- Diagnostics via 2 configurable control outputs and LEDs
- 2 EDM inputs for monitoring of downstream contactors or connection of a start push button
Download datasheet (PDF)Ask an engineer
Price and lead time on request — add this part to your quote list and we will reply with pricing and availability.
Features
- 8 safety inputs and 2 solid-state safety output pairs (4 outputs) enable use as a stand-alone device
- 4 test outputs for sensor monitoring
- Diagnostics via 2 configurable control outputs and LEDs
- 2 EDM inputs for monitoring of downstream contactors or connection of a start push button
- Up to 14 expansion modules (up to 4 devices of any given module variant) can be connected
- Optional 350EPT T-connector (proprietary 5-way bus) for space-saving connection of the base module with expansion modules
- Optional 350EPU USB cable for transferring the configuration to the base module
- Optional 350EPS memory card for data storage and base module configuration without PC
Technical specifications
| Housing colour | Gehäuse schwarz Frontplatte gelb |
|---|---|
| Max. switching voltage at safety output | 24 V DC |
| Max. switching voltage at control output | 24 V DC |
| Max. switching current at safety output | 0.4 A |
| Max. switching current at control output | 0.1 A |
| Number of configurable electronic safety outputs | 4 |
| Number of electronic control outputs | 2 |
| Number of test outputs (clocked) | 4 |
| Number of safety inputs | 8 |
| Stop category 0 (STO) nach IEC 61800-5-2 | Depending on the configuration |
| Stop category 1 (SS1) nach IEC 61800-5-2 | Depending on the configuration |
| EDM/start input | Depending on the configuration |
| Start function | Depending on the configuration |
| Feedback circuit | Depending on the configuration |
| Start-up test present | Depending on the configuration |
| LED display | five-coloured |
| Overvoltage category | II |
| Pollution degree | 2 |
| Operating voltage min. | 19.2 V DC |
| Operating voltage max. | 28.8 V DC |
| Short-circuit detection | Depending on the configuration |
| Cross-short detection | Depending on the configuration |
| Wire-break detection | Depending on the configuration |
| Power consumption | 3 W |
| Operating time | Depending on the configuration ms |
| Response time | 10,6 – 12,6 ms |
| Contact form | Abhängig von der Konfiguration |
| PL acc. to EN ISO 13849-1 | e |
| SIL acc. to IEC 61508 | 3 |
| SIL CL acc. to IEC 62061 | 3 |
| PFHD according to IEC 61508 | 6,85 x 10-9 1/h |
| MTTFd | 30…100 a |
| Safe Failure Fraction (SFF) to IEC 61508 | 99.8 % |
| DC | 99% <= DC (high) % |
| Category acc. to EN ISO 13849-1 | 4 |
| Type | 4 EN 61496-1 |
| Dimensions | 108 x 22,5 x 114,5 mm (H/B/T) |
| Configuration interface | USB Mini-B |
| Housing material | PA |
| Protection class, housing | IP20 DIN EN 60529 |
| Operating temperature min. | -10 °C |
| Max. operating temperature | 55 °C |
| Min. storage temperature | -20 °C |
| Max. storage temperature | 85 °C |
| Relative humidity | 10…95 % |
| Mounting type | Mounting rail |
| Weight | 150 g |
| Max. length of the connection cables | 100 m |
| Screw terminals | yes |
| Pluggable connection terminals | yes |
| Min. connection cross section | 0.5 mm² |
| Max. connection cross section | 2.5 mm² |
| Slot for memory card (350EPS) present | yes |
| Connection present on PC | yes |
| Connection to slave modules | yes |
| Max. number of slave modules | 14 |
| Max. number of slave modules of the same type | 4 |
| Certified in accordance with | EN ISO 13849-1 IEC 61508 IEC 62061 UL 508 / CSA 22.2 |
| CE label | yes |
Ordering information
Available article numbers:
485EPB
