DOLD AD 8851 – Latching relay
Latching relay
You are here:
Control devices
79 productsInterface, coupling and latching relays, power supply units and I/O modules that connect controllers to the machines and systems they drive.
DOLD BA 7632 – Stepping relay
Stepping relay
- Wide voltage range AC/DC 24 … 230 V
- Energy-saving, no holding power required
- Defined switching position in the case of supply voltage failure
DOLD BA 7961 – Contact protection relay
Contact protection relay
- High electrical life of control contacts
- Longer maintenance intervals
DOLD BG 5595 – Switched power supply
Switched power supply
- Stable DC power supply
DOLD CA 3056 – Interface relay
Interface relay
- As option goldplated contacts (5 μm Au) to switch low loads
- CA 3056 and CB 3056: Protective separation acc. to IEC/EN 61140, IEC/EN 60947-1: 6 kV / 2
DOLD CB 3056 – Interface relay
Interface relay
- As option goldplated contacts (5 μm Au) to switch low loads
- CA 3056 and CB 3056: Protective separation acc. to IEC/EN 61140, IEC/EN 60947-1: 6 kV / 2
DOLD CB 3057 – Interface relay
Interface relay
- Test possible without influence on PLC
DOLD CC 3056 – Interface relay
Interface relay
- As option goldplated contacts (5 μm Au) to switch low loads
- CA 3056 and CB 3056: Protective separation acc. to IEC/EN 61140, IEC/EN 60947-1: 6 kV / 2
DOLD IG 3051 – Interface relay
Interface relay
DOLD IK 3050 – Interface relay
Interface relay
- Suitable for switching low loads
- Compact design for installation systems and industrial distribution systems according to DIN 43880
DOLD IK 3070 – Interface relay
Interface relay
DOLD IK 3076 – Interface relay
Interface relay
- According to IEC/EN 60947-5-1, IEC/EN 61810-1
- Protective separation according to IEC/EN 61140, IEC/EN 60947-1 in configuration with 1 changeover contact
- With input wiring protection against voltage surges
- High permanent current Ith
DOLD IK 8701 – Input-Output interface relay
Input-Output interface relay
- Optionally contacts with up to a maximum 4 changeover contacts
- Optionally for 2-wire initiator activation
- Optionally for switching low loads
- Optionally for switching lamps with parallel compensation (e.g. HQ lamps)
- Optionally for switching large inductive direct current loads
DOLD IK 8802 – Interface relay
Interface relay
DOLD IL 8701 – Input-Output interface relay
Input-Output interface relay
- Optionally contacts with up to a maximum 4 changeover contacts
- Optionally for 2-wire initiator activation
- Optionally for switching low loads
- Optionally for switching lamps with parallel compensation (e.g. HQ lamps)
- Optionally for switching large inductive direct current loads
DOLD IN 8701 – Input-Output interface relay
Input-Output interface relay
- Optionally contacts with up to a maximum 4 changeover contacts
- Optionally for 2-wire initiator activation
- Optionally for switching low loads
- Optionally for switching lamps with parallel compensation (e.g. HQ lamps)
- Optionally for switching large inductive direct current loads
DOLD MK 3046 – Interface relay
Interface relay
- According to IEC/EN 60947-5-1
- Compact version with 3 or 2 separate controllable relay systems
DOLD MK 3047 – Interface relay
Interface relay
DOLD MK 8804N – Interface relay
Interface relay
- Up to 4 changeover contacts in 22,5 mm width
- With various terminals
DOLD MK 8852 – Latching relay
Latching relay
- Energy saving, no holding capacity required
- Manual switching by manual actuator possible
- Switching position visible from outside
DOLD ML 3045 – Interface relay
Interface relay
- For 2 control voltages
- Output relay can be switched off via switch for test purposes
- Optionally safe separation according to IEC/EN 61140, IEC/EN 60 947-1 and for switching low loads
DOLD ML 3059 – Interface relay
Interface relay
- 1 or 2 changeover contacts
- Optionally safe separation according to IEC/EN 61 140, IEC/EN 60 947-1, 6 kV/2- Between coil and contacts- Between the two contacts
- Optionally for switching of low loads
DOLD RL 5596 – Switched power supply
Switched power supply
- Space saving in industrial cabinets because compact construction type
- Universal use with wide voltage range
- High efficiency
DOLD UG 3076/007 – Interface relay
Interface relay
- According to IEC/EN 60947-5-1
- Reliable fast response
- Simple contact multiplication
- Cost and space saving alternative compared to contactors
- With plugable terminal blocks for easy exchange of devices
Control technology and fieldbus-capable I/O modules from DOLD
DOLD has a long track record in control technology and, by its own account, introduced the first PLC in a standard housing to the automotive and machine tool industry in 1978. Its current control portfolio offers safe and efficient solutions for a variety of requirements, including a broad range of fieldbus-capable input and output modules.
Much of the range consists of interface relays for separating and adapting signals. The narrowest are the IG 3051 at 8.8 mm and the CA 3056, CB 3056 and CC 3056 at 11.5 mm, with a choice of contact sets and an optional MOV on the input for better surge immunity; the CB 3057 adds an Auto/On/Off service switch. The IK 3050 offers protective separation to IEC/EN 61140, the IK 3070 relay, triac or transistor outputs, and the MK 8804N up to 4 changeover contacts.
For storing switching states, the AD 8851, MK 8852 and UG 8851 latching relays allow manual operation, and the UG 8851 uses forcibly guided contacts to IEC 61810-3. The BA 7632 stepping relay, BA 7961 contact protection relay, IK 8701, IL 8701 and IN 8701 input-output relays (17.5, 35 or 52.5 mm) and the BG 5595 DC 24 V, 1 A power supply complete the selection. Send us your part number or control task and we'll help you find the matching device.
- Fieldbus-capable input and output modules
- IG 3051 interface relay, only 8.8 mm wide
- IK 3070 with relay, triac or transistor output
- UG 8851 latching relay with forcibly guided contacts
- BG 5595 power supply, DC 24 V up to 1 A
