What products does Hirotronix supply?

Hirotronix supplies industrial automation sensors, machine safety systems, operator controls, level measurement systems, and automation components.

Where is Hirotronix located?

Hirotronix is located in Mississauga, Ontario, Canada.

Does Hirotronix provide worldwide service?

Yes, Hirotronix supplies automation and sensor solutions worldwide.

TSL-ESCHA TL80 signal light

Brand	TSL-ESCHA
Order number	TL80 – configured to order

Maximum efficiency and high luminosity

TL80 signal light

Illuminated surface stepped to ensure flush back side mounting in claddings
Flat construction type with robust glass cover
Ideal for signaling
Luminous colors: red, blue, white
Beam angle of 120°, 80° or diffuse
Special feature: Plastic housing

Technical data

Nominal voltage: 24 or 110 VDC
Nominal power: 3 W @ 24 VDC
Operating temperature: -40 … +50 °C
Degree of protection: IP67
Visible external dimensions (L x W x H): 80 x 20 x 4 mm

About the Signal lights

The SL Series and TL Series signal lights are often used to signal the door status in buses or trains. Passengers thus know when the door will open or close. The rounded housing design ensures optimal recognition, because the warning signal can be seen from different perspectives. TSL’s signal lights are suitable for the door area on both the interior and exterior of public transport vehicles.

Although the door area is one of the most important application areas for the signal lights, depending on the specific product, they can also be used in buildings or industry. The SLE63, for example, can be used in engine rooms or for access control. The SLE150 is also used as a start and stop light or signal and warning light in industrial applications.

The SLE16x series is equally versatile. TSL-ESCHA has launched the next generation of signal lights with the SLE161 and SLE162. The SLE161 and SLE162 replace the previous SLE160. The SLE161 is a variant with 10 LEDs. A lateral reflector can be selected for even better lateral visibility. The SLE162 provides an even more uniform and homogeneous illumination with 20 LEDs. It is also possible to use 2 x 20 LEDs with two colors (red/green or red/white) to indicate different states. A white cover is then used for this purpose. Due to new, efficient LEDs, the signal light is even easier to see and illuminates more homogeneously. As an option, a black moulded seal can be selected to surround the LED signal light, hiding the white base plate. This provides a visually harmonious appearance to the vehicle design.

Versatile signal lights

The TL Series was originally designed as a step light in the door area. The lights were used to indicate the extension of sliding steps or ramps. The product is now widely used as a signal light. The big advantage of the TL Series is its very compact design. The TL80 and TL83 require very little mounting space, making them ideal for environments with limited space. Variants with laminated safety glass make these signal lights particularly resistant to damage from vandalism and stone chips.

The TL80 has a plastic housing and is protected against corrosion. Full encapsulation protects it against humidity. Its moderate brightness makes the TL80 perfectly suited for sleeping cars in trains. The TL83 has a die-cast aluminum housing and a nominal power of four watts, resulting in greater luminosity. The TL83 is thus ideally suited for use as a door signal light. Its flat design also means it can be used as a surface-mounted variant. The TL83 is also used in emergency vehicles, e.g. for construction sites (ambient lighting) or fire departments (lifting cage and pole lighting).

Signal light product highlights

Optimal brightness and recognition according to intended usage
Often used in the door area on both the interior and exterior for signaling to passengers or operating personnel
Robust housing technology, high degree of protection and wide operating temperature range
Proven chemical resistance to many surface cleaners
Can be mounted from the front or back side and comes equipped with a cable outlet for optional plugs
Complies with the current standards for rail vehicles (EN 50155, EN 45545-2 and EN 61373)

The SLK63 signal light in the door area of a regional train.

SLF63

Your product solution is not in our range yet? Then feel free to contact us. As we are a customer-oriented company, you can have us customize our products to suit your wishes and operating conditions.