| Brand | Pulsotronic |
|---|---|
| Order number | 08317320465 |
You are here:
Pulsotronic KJ4-M12MN50-NA-V2 – Inductive sensor, NAMUR, 4 mm, Non-flush
- Brand
- Pulsotronic
- Part number
- KJ4-M12MN50-NA-V2
- Order number
- 08317320465
Inductive sensor, NAMUR
- Switching distance: 4 mm
- Mounting: Non-flush
- Signal Type: Namur
- Connection: Connector M12
- Operating voltage: 6 – 12 V DC
Download datasheet (PDF)Ask an engineer
Price and lead time on request — add this part to your quote list and we will reply with pricing and availability.
Inductive sensors with cylindrical housings. Dia 6.5 up to M30 (dia 34) with standard and double sensing range available. Termination to DC-voltage by cable or circular plug M8 / M12.
Product details
| Switching distance | 4 mm |
|---|---|
| Mounting | Non-flush |
| Signal Type | Namur |
| Connection | Connector M12 |
| Dimension (in mm) | fine-pitch thread M 12 x 50 |
Technical specification
| Operating voltage | 6 – 12 V DC |
|---|---|
| Max. ripple | ≤ 5 % |
| No load current | ≤ 3,5 mA |
| Switching frequency | 1000 Hz |
| Operating temperature | -25 ° C to +60 ° C |
| Temperature drift | ≤ 10 % |
| Repeat accuracy | ≤ 10 % |
| Time delay | 100 ms |
| Short-circuit proof | yes |
| Overload protection | yes |
| Reverse voltage protection | yes |
| Protection category | IP67 |
| EMC-level | DIN EN 60947-5-6:2000-12 |
| Housing material | Nickel-plated brass |
| Material active face | PCB |
| Utilisation category | DC 13 |
| Contact material | CuSn |
| Contact surface material | NiAu |
| Contact holder | PA 6 |
| Nominal operating voltage | 8,2 V DC |
| Termination | Connector M12 4-pin |
| Load current OFF | approx. 0,5 mA |
| Load current ON | approx. 3,5 mA |
| FIT / MTTF acc. to SIEMENS 29500 | 17,38 / 6568y |
Downloads
- Data sheet KJ4-M12MN50-NA-V2
