| Brand | Pulsotronic |
|---|---|
| Order number | 08430330013 |
You are here:
Pulsotronic STP100DB-L – Touch sensor with stopper
- Brand
- Pulsotronic
- Part number
- STP100DB-L
- Order number
- 08430330013
Touch sensor with stopper
- Switch type: NC (normally closed)
- Signal Type: Mechanical contact
- Connection: Cable 2m
- Operating voltage: 5 – 24 V DC
- Protection category: IP67
Download datasheet (PDF)Ask an engineer
Price and lead time on request — add this part to your quote list and we will reply with pricing and availability.
The combination of sensor and stopper in housing M6, M8 and M10 reduces the effort for the client.
Product details
| Switch type | NC (normally closed) |
|---|---|
| Signal Type | Mechanical contact |
| Connection | Cable 2m |
| Dimension (in mm) | M 10×1.5 x 55.4 |
| Weight | 90 1 |
Technical specification
| Operating voltage | 5 – 24 V DC |
|---|---|
| Max. load current | 10 |
| Switching hysteresis | 0 |
| Operating temperature | 0 ° C to 80 ° C |
| Temperature drift | 0 |
| Repeat accuracy | 0,01 mm (at operating speed 50 … 200 mm/min) |
| Switching state | LED |
| Stroke | 0,7 mm |
| Pre-travel | 0,4 mm |
| Accuracy | 0,01 mm |
| Probe tip | Cylinder 5,5/R 5 |
| Probe tip material | Stainless steel |
| Static load | 5000 N |
| Operation load | 4 N |
| Ttl mech | 10 millions cycles |
| Reverse voltage protection | no |
| Protection category | IP67 |
| Wiring | Two-wire |
| Termination | cable 2 m, 2 wire, Ø2.8 mm, oil resistant |
| Approach direction | axial |
Downloads
- Data sheet STP100DB-L
