ELGO IZBox-600 Measurement and Transmission System

Features

• Integrated 868 MHz wireless module
• High performance ceramic antenna (integrated)
• Transmission range up to 200 meters (with intervisibility)
• Four resolutions selectable (0.01 / 0.05 / 0.10 / 1.00 mm)
• Measuring system for linear or rotative measurements
• Integrated battery case (with cover) for 1.5 V mono cell
• Two status LEDs for first start up (can be switched off)
• RF transmission cyclically or released by external input
• Reset of the measurement value by external input
• System configuration settings via DIP switches
• Easy to install (via mounting holes or optionally by snap-on attachment for top hat rails)
• Auto Power Off function at sensor inactivity
• Auto Power On at sensor movement

Technical data

Mechanical data

Housing (Evaluation units)	ABS plastic, black
Housing dimensions (L X W x H)	150 x 80 x 39.5 mm
Total height	67 mm (incl. senor connector)
Mounting	standard: four mounting holes and two 30 mm slotted holes for M4 screwsoptional: snap-on attachment for top hat rail

Electrical data

System configuration	via 32 DIP switches
System resolution (adjustable)	0.01 / 0.05 / 0.10 / 1.00 mm
Power supply voltage	1.5 V battery (type D, mono cell)
Current consumption	< 1 mA at 1.5 V during normal operation without radio transmissionapprox. 5 mA at 1.5 V during continuous radio transmission
Battery Service life	1 … 3 years (depending on battery type and effective on-time)
External inputs	2 (via RJ45 socket)- manual reset (measurement value)- manual wireless transmission
Accessory	RF-MODULE 868 MHz RS232 (Box), RF-MODULE 868 MHz USB (Stick), IZ16-620: external slave indicator Snap-on attachment for top hat rail (Art. No. 764000006)

Environmental conditions

Operating temperature	0 … +50 °C
Storage temperature	-10 … +60 °C
Humidity	max. 80 %, non-condensing
Protection class	IP40

Mechanical data

Range	up to 200 m (by intervisibility)
HF-data rate	38 kbps
Power output	typ 2 dBm e.i.r.p. (10 dBm an 50?)
Input sensitivity	up to -102 dBm (-110 dBm an 50?)
FrFrequency range	863 – 868.6 MHz
Channel spacing	50 kHz
Modulation method	2-FSK, MSK
Antenna	integrated ceramic antenna
Topology	point to point
Transmission	bi-directional, half-duplex, with receipt, with CRC-checksum calculation, five-time repeating of non-acknowledged radio telegrams
Addressing	2 byte address space, max. 64000 different addresses
Conformity (Europe)	EN 300220-1, EN 301489-1/-3, EN 60950-1, EN 50371

Environmental conditions

Type designation	MS-250
Dimensions (L x W x H)	30 x 10 x 15 mm
Measurement principle	magnetic, incremental
Required magnetic tape	MB20-25-10-1-R (for linear measurements)
Required magnetic ring	MR 3848 (for rotative applications)
Pole pitch (magnetic tape/ ring)	2.5 mm
Distance sensor- magnetic tape	max. 0.8 mm
Resolution	0.1 … 0.01 mm
Repeat accuracy	± 2 inkrements
Maximum measuring length	theoretically unlimited
Operation speed	max. 4 m/s
Housing material	zinc die cast
Protection class	IP67
Connections	round connector
Sensor cable	drag-chain suitable, 6-wire, twisted pairs and double-shielded
Sensor cable length	0.1 bis max. 2.0 m
Sensor cable bending radius	min. 60 mm
Weight	ca. 30 g
Operating temperature	0 … +50 °C
Storage temperature	-10 … +60 °C
Humidity	max. 95 %, non-condensing
Influence of external magnetic fields	external magnetic fields > 1 mT, which directly impinge upon the sensor, can affect the system accuracy

Downloads

• Data sheet IZBox-600
• Operating instructions IZBox-600