| Brand | Pulsotronic |
|---|---|
| Order number | 08317801464 |
You are here:
Pulsotronic KJ0,8-G4EB38-DPÖ-V1 – Inductive sensor DC, 0.8 mm, Flush
- Brand
- Pulsotronic
- Part number
- KJ0,8-G4EB38-DPÖ-V1
- Order number
- 08317801464
Inductive sensor DC
- Switching distance: 0.8 mm
- Mounting: Flush
- Switch type: NC (normally closed)
- Signal Type: DC PNP
- Connection: Connector M8
Download datasheet (PDF)Ask an engineer
Price and lead time on request — add this part to your quote list and we will reply with pricing and availability.
Inductive sensors with cylindrical housings. Dia 6.5 up to M30 (dia 34) with standard and double sensing range available. Termination to DC-voltage by cable or circular plug M8 / M12.
Product details
| Switching distance | 0.8 mm |
|---|---|
| Mounting | Flush |
| Switch type | NC (normally closed) |
| Signal Type | DC PNP |
| Connection | Connector M8 |
| Dimension (in mm) | D 4 x 38 |
Technical specification
| Operating voltage | 10 – 30 VDC |
|---|---|
| Max. ripple | ≤ 10 % |
| Voltage drop | 2 V |
| Max. load current | 200 mA |
| No load current | ≤ 13 mA |
| Leakage current | ≤ 10 µA |
| Switching frequency | 2000 Hz |
| Switching hysteresis | ≤ 15 % |
| Operating temperature | -25 ° C to +70 ° C |
| Temperature drift | ≤ 10 % |
| Repeat accuracy | ≤ 5 % |
| Switching state | LED |
| Time delay | 100 ms |
| Short-circuit proof | yes |
| Overload protection | yes |
| Reverse voltage protection | yes |
| Protection category | IP67 |
| EMC-level | DIN EN 60947-5-2:2008 |
| Housing material | Stainless steel V2A |
| Material active face | POM |
| Utilisation category | DC 13 |
| Contact material | CuSn |
| Contact surface material | NiAu |
| Nominal operating voltage | 24 V DC |
| Termination | Connector M8 3-pin |
| FIT / MTTF acc. to SIEMENS 29500 | 37,37 / 3095y |
Downloads
- Data sheet KJ0,8-G4EB38-DPÖ-V1
