| Brand | Pulsotronic |
|---|---|
| Order number | 08310000294 |
You are here:
Pulsotronic KJ15-M30MN40-ANI – Inductive sensor, analog, from 3 mm to 15 mm, Non-flush
- Brand
- Pulsotronic
- Part number
- KJ15-M30MN40-ANI
- Order number
- 08310000294
Inductive sensor, analog
- Switching distance: from 3 mm to 15 mm
- Mounting: Non-flush
- Switch type: Analog
- Signal Type: Analog current
- Connection: Cable
Download datasheet (PDF)Ask an engineer
Price and lead time on request — add this part to your quote list and we will reply with pricing and availability.
Analog sensors with current and/or voltage Output. Teach-In or inverse Signal curve at request. Housings cylindrical from dia 6.5 up to square 40x40x120 available
Product details
| Switching distance | from 3 mm to 15 mm |
|---|---|
| Mounting | Non-flush |
| Switch type | Analog |
| Signal Type | Analog current |
| Connection | Cable |
| Dimension (in mm) | fine-pitch thread M 30 x 40 |
Technical specification
| Special features | Output Current 4 … 20 mA |
|---|---|
| Operating voltage | 11 – 35 VDC |
| Max. ripple | ≤ 5 % |
| No load current | ≤ 10 mA |
| Switching frequency | 150 Hz |
| Operating temperature | -25 ° C to +70 ° C |
| Temperature drift | +/- 5 % |
| Repeat accuracy | ≤ 1 % |
| Linearity | ≤ 5 % |
| Analog output | no |
| Time delay | 300 ms |
| Resolution | 1,33 mA / mm |
| Reverse voltage protection | yes |
| Protection category | IP67 |
| EMC-level | DIN EN 60947-5-7:2004-06 |
| Housing material | Nickel-plated brass |
| Material active face | PCB |
| Cable length | 2 m |
| Utilisation category | DC 13 |
| Cable material | PVC LIYY grey |
| Nominal operating voltage | 24 V DC |
| Cable cross-section | 3×0.34 mm² |
| Internal load resistor | <= 500 Ohm |
| FIT / MTTF acc. to SIEMENS 29500 | 73,26 / 1558y |
Downloads
- Data sheet KJ15-M30MN40-ANI
