| Brand | Pulsotronic |
|---|---|
| Order number | 08313223032 |
You are here:
Pulsotronic SJ22-M30MB80-DNS-V2 – Inductive sensor DC, 22 mm, Flush
- Brand
- Pulsotronic
- Part number
- SJ22-M30MB80-DNS-V2
- Order number
- 08313223032
Inductive sensor DC
- Switching distance: 22 mm
- Mounting: Flush
- Switch type: NO (normally open)
- Signal Type: DC NPN
- Connection: Connector M12
Download datasheet (PDF)Ask an engineer
Price and lead time on request — add this part to your quote list and we will reply with pricing and availability.
Inductive sensors with cylindrical housings. Dia 6.5 up to M30 (dia 34) with standard and double sensing range available. Termination to DC-voltage by cable or circular plug M8 / M12.
Product details
| Switching distance | 22 mm |
|---|---|
| Mounting | Flush |
| Switch type | NO (normally open) |
| Signal Type | DC NPN |
| Connection | Connector M12 |
| Dimension (in mm) | fine-pitch thread M 30 x 80 |
Technical specification
| Special features | quasi-shielded mounting |
|---|---|
| Operating voltage | 10 – 30 VDC |
| Max. ripple | ≤ 10 % |
| Voltage drop | 2 V |
| Max. load current | 200 mA |
| No load current | ≤ 10 mA |
| Leakage current | ≤ 50 µA |
| Switching frequency | 300 Hz |
| Switching hysteresis | ≤ 15 % |
| Operating temperature | -25 ° C to +70 ° C |
| Temperature drift | ≤ 10 % |
| Repeat accuracy | ≤ 5 % |
| Switching state | LED |
| Time delay | 300 ms |
| Short-circuit proof | yes |
| Overload protection | yes |
| Reverse voltage protection | yes |
| Protection category | IP67 |
| EMC-level | DIN EN 60947-5-2:2008 |
| Housing material | Nickel-plated brass |
| Material active face | PBT |
| Utilisation category | DC 13 |
| Contact material | CuSn |
| Contact surface material | NiAu |
| Nominal operating voltage | 24 V DC |
| Termination | Connector M12 4-pin |
Downloads
- Data sheet SJ22-M30MB80-DNS-V2
