STEM Alnico permanent magnet
Alnico permanent magnet
- Limit switch actuator
- Proximity switch actuator
- Magnetic retention
- Magnetic material: alnico
You are here:
STEM
249 products
STEM Angular Sensor KSA1-KSA2
Low cost sensor to detect absolute angular position of a rotating shaft
STEM Angular Sensor KSA4
Angular Sensor KSA4
- Low-cost sensor for detecting the absolute angular position of a rotating permanent magnet.
- Reliable measurement even with a large distance between sensor and magnet.
- Angular limit switches
- Angular position feedback for motor control
STEM Atex Magnetic sensor D1211BULZ
Proximity magnetic sensor based on reed technology to be used in a potentially explosive atmosphere (ATEX)
STEM Atex Magnetic sensor D122BBULZ
Proximity magnetic sensor based on reed technology to be used in a potentially explosive atmosphere (ATEX)
STEM Atex Magnetic sensor D1281BULZ
Proximity magnetic sensor based on reed technology to be used in a potentially explosive atmosphere
STEM Atex Magnetic sensor D12PBBULZ
Proximity magnetic sensor based on reed technology to be used in a potentially explosive atmosphere (ATEX)
STEM Atex Magnetic sensor E780
Proximity magnetic sensor based on reed technology to be used in a potentially explosive atmosphere
STEM Atex safety sensor N557
Multichannel coded magnetic sensor based on reed technology
STEM Automatic rescue device NA22-NA24
NA22 and NA24 are emergency rescue devices used to move the elevator to the nearest floor to be used in a traction and hydraulic lift
STEM Battery Charger NBC12V1BLCN0
The NBC12V1BLCN0 is a complete solution to use only one product to control and charge one 12V/ 7.2 Ah lead-acid battery.
STEM Battery charger NBC12V1BLCR
The NBC 12V1BLCR is a complete solution to use only one product to control and charge a 12V / 7.2 Ah lead-acid battery.
STEM Battery charger NBC12V2BLC-NBC12V2BLCR
The NBC 12V 2B LCx is a complete solution to use only one product to control and charge two 12V / 7.2 Ah lead-acid battery. The batteries are recharged and monitored independently even when they are connected in series.
STEM Battery charger NBC24V1BLCN0-NBC24V1BLCWMN
The NBC 24V 1B LCx is a complete solution to use only one product to control and charge one 24V / 7.2 Ah lead-acid battery or two 12V / 7.2 Ah batteries connected in series.
STEM Battery charger NBCDC12V4B
The NBCDC12V4B is a complete solution to use only one product to control and charge four 12V / 7.2 Ah lead-acid battery. The batteries are recharged and monitored independently even when they are connected in series. This product uses a DC power supply therefore it is particularly suitable in applications related to renewable energy such as photovoltaic cells.
STEM Bistable magnetic sensor series E537-E577
Bistable magnetic sensor series E537-E577
- Limit switch
- Proximity switch
- Detection of movable part
- Elevator position system
STEM Bistable magnetic sensor series E61x-E65x
Proximity magnetic switch based on reed technology
STEM Capacitive liquid level sensor KLC1
KLC detects the presence / absence of water or similar liquids in a tank of non-conductive material (ABS plastic, acrylic…). The sensor uses non-contact capacitive technology and is designed to detect liquids through a wall of a non-metallic tank.
STEM Caps for tank
Caps for tank
STEM Direction and speed hall sensor E57HDV
Magnetic sensor to be used to detect speed and direction of a movable part.
STEM Fixing braket E61x-E65x
Fixing system for E61-E65 Bistable series
STEM Fixing Plates for sensors
This fixing plates allows the installation of the sensor with the supplied stop nuts: thanks to the two series of fixing holes it’s possible to mount the sensor at 90° or 180° respect to the guard’s wall.
STEM Fixing supports for cylindrical sensors
Fixing supports for cylindrical sensors
- Fixing system jaw lenghts, 30 -100 -150 mm, uninflammable nylon glass material
- Fixing system jaw lenght 250 mm, uninflammable polycarbonate material
- Support for sensor 27 x 25 x 16mm, uninflammable nylon glass material
STEM Floating suitable for liquid food 2G01
The floats, with encapsulated magnets, are manufactured with materials certified for food applications and they can be used with many different type of our magnetic sensors.