| Brand | Pulsotronic |
|---|---|
| Order number | 08317143665 |
You are here:
Pulsotronic KJ9-M30MB50-ANU-V2 – Inductive sensor, analog, from 1 mm to 9 mm, Flush
- Brand
- Pulsotronic
- Part number
- KJ9-M30MB50-ANU-V2
- Order number
- 08317143665
Inductive sensor, analog
- Switching distance: from 1 mm to 9 mm
- Mounting: Flush
- Switch type: Analog
- Signal Type: Analog voltage
- Connection: Connector M12
Download datasheet (PDF)Ask an engineer
Price and lead time on request — add this part to your quote list and we will reply with pricing and availability.
Analog sensors with current and/or voltage Output. Teach-In or inverse Signal curve at request. Housings cylindrical from dia 6.5 up to square 40x40x120 available
Product details
| Switching distance | from 1 mm to 9 mm |
|---|---|
| Mounting | Flush |
| Switch type | Analog |
| Signal Type | Analog voltage |
| Connection | Connector M12 |
| Dimension (in mm) | fine-pitch thread M 30 x 50 |
Technical specification
| Special features | Output Voltage 1 … 9 Volt |
|---|---|
| Operating voltage | 11 – 35 VDC |
| Max. ripple | ≤ 5 % |
| No load current | ≤ 5 mA |
| Switching frequency | 400 Hz |
| Operating temperature | -25 ° C to +70 ° C |
| Temperature drift | +/-5 % |
| Repeat accuracy | ≤ 1 % |
| Linearity | ≤ 5 % |
| Time delay | 300 ms |
| Resolution | 1 V / mm |
| Reverse voltage protection | yes |
| Protection category | IP67 |
| EMC-level | DIN EN 60947-5-7:2004-06 |
| Housing material | Nickel-plated brass |
| Material active face | PCB |
| Utilisation category | DC 13 |
| Contact material | CuSn |
| Contact surface material | NiAu |
| Contact holder | PA 6 |
| Nominal operating voltage | 24 V DC |
| Termination | Connector M12 4-pin |
| Internal load resistor | > 1 kOhm |
| FIT / MTTF acc. to SIEMENS 29500 | 95,69 / 1193y |
Downloads
- Data sheet KJ9-M30MB50-ANU-V2
