| Brand | Pulsotronic |
|---|---|
| Order number | 08313301410 |
You are here:
Pulsotronic SJ14-M30MN80-ANUI – Inductive sensor, analog, from 7 mm to 14 mm, Non-flush
- Brand
- Pulsotronic
- Part number
- SJ14-M30MN80-ANUI
- Order number
- 08313301410
Inductive sensor, analog
- Switching distance: from 7 mm to 14 mm
- Mounting: Non-flush
- Switch type: Analog
- Signal Type: Analog current/voltage
- Connection: Cable
Download datasheet (PDF)Ask an engineer
Price and lead time on request — add this part to your quote list and we will reply with pricing and availability.
Analog sensors with current and/or voltage Output. Teach-In or inverse Signal curve at request. Housings cylindrical from dia 6.5 up to square 40x40x120 available
Product details
| Switching distance | from 7 mm to 14 mm |
|---|---|
| Mounting | Non-flush |
| Switch type | Analog |
| Signal Type | Analog current/voltage |
| Connection | Cable |
| Dimension (in mm) | fine-pitch thread M 30 x 80 |
Technical specification
| Special features | Output Voltage 0 … 10 Volt Output Current 0 … 20 mA |
|---|---|
| Operating voltage | 18 – 30 VDC |
| Max. ripple | ≤ 10 % |
| No load current | ≤ 15 mA |
| Switching frequency | 30 Hz |
| Operating temperature | 0 ° C to +70 ° C |
| Temperature drift | +/- 5 % |
| Repeat accuracy | < 0,02 % |
| Linearity | ≤ 10 % |
| Time delay | 300 ms |
| Reverse voltage protection | no |
| Protection category | IP67 |
| EMC-level | DIN EN 60947-5-7:2004-06 |
| Housing material | Nickel-plated brass |
| Material active face | PBT |
| Cable length | 2 m |
| Utilisation category | DC 13 |
| Cable material | PVC LIYY grey |
| Nominal operating voltage | 24 V DC |
| Cable cross-section | 4×0.5 mm² |
| Internal load resistor | > 1 kOhm |
Downloads
- Data sheet SJ14-M30MN80-ANUI
