| Brand | Pulsotronic |
|---|---|
| Order number | 08313661221 |
You are here:
Pulsotronic SJ6-Q12MB60-DPÖ-V1 – Inductive sensor DC, 6 mm, Flush
- Brand
- Pulsotronic
- Part number
- SJ6-Q12MB60-DPÖ-V1
- Order number
- 08313661221
Inductive sensor DC
- Switching distance: 6 mm
- Mounting: Flush
- Switch type: NC (normally closed)
- Signal Type: DC PNP
- Connection: Connector M8
Download datasheet (PDF)Ask an engineer
Price and lead time on request — add this part to your quote list and we will reply with pricing and availability.
Inductive Sensors with squared housings. Design 5x5x25mm up to 80x80mm with standard, double or XXL-sensing range available. Suitable for DC or AC voltage power supply.
Product details
| Switching distance | 6 mm |
|---|---|
| Mounting | Flush |
| Switch type | NC (normally closed) |
| Signal Type | DC PNP |
| Connection | Connector M8 |
| Dimension (in mm) | Q 12 x 12 x 60 |
Technical specification
| Special features | quasi-shielded mounting |
|---|---|
| Operating voltage | 10 – 30 VDC |
| Max. ripple | ≤ 10 % |
| Voltage drop | 2 V |
| Max. load current | 200 mA |
| No load current | ≤ 10 mA |
| Leakage current | ≤ 10 µA |
| Switching frequency | 1000 Hz |
| Switching hysteresis | ≤ 15 % |
| Operating temperature | -25 ° C to +70 ° C |
| Temperature drift | ≤ 10 % |
| Repeat accuracy | ≤ 5 % |
| Switching state | LED |
| Time delay | 300 ms |
| Short-circuit proof | yes |
| Overload protection | yes |
| Reverse voltage protection | yes |
| Protection category | IP67 |
| EMC-level | DIN EN 60947-5-2:2008 |
| Housing material | Nickel-plated brass |
| Material active face | POM |
| Utilisation category | DC 13 |
| Contact material | CuSn |
| Contact surface material | NiAu |
| Nominal operating voltage | 24 V DC |
| Termination | Connector M8 3-pin |
Downloads
- Data sheet SJ6-Q12MB60-DPÖ-V1
