ELGO Magnetic rings hard ferrite
For rotative measurements
- Interpolation up to zu 22.800 pulses/revolution
- Direct assembly on axes possible (e.g. motor shaft)
- Contactless and wear-free measuring principle
- Applicable in roughest environments (IP67)
You are here:
All products
7376 products
ELGO Magnetic Tape MB20 | AB20
Incremental or absolute coded
magnetic tape layoutA the cover tape is used for the mechanical protection of the magnetic tape and is glued onto the magnetic plastictape after installation
ELGO P40 Position Controller for 1 or 2 Axes
Position Controller for Metal or Woodworking Machines
- One- or two-axis version
- LCD display
- Easy handling
- Multi-lingual menu navigation
ELGO P4011 for one 1 axis
Compact positioning control
- LCD display
- Manual operation
- Single record operation
- Relay outputs
ELGO P40T Touch Screen Positioning Control
Programmable Multi Axis Position Controller
- TFT- display with touch operation
- Manual function
- Single set operation
- Program memory
ELGO P52 CNC Axes Controller with Touch Screen
Universal Position Controller for Multi Axes Applications
- Positioning controller for up to 4 axes
- Customized software for sheet metal processing (shears and press brakes)
- 7“ or 10.1“ widescreen colour TFT
- Navigation via high-quality resistive touchscreen
ELGO PLMIX2 incremental magnetic encoder
With bus connection
- Incremental sensor with CANopen interface
- Very compact housing
- High resolution up to 0.005 mm
- Permissible reading distance up to 2 mm
ELGO PMIX Guided Linear Encoder Unit
Digital Potentiometer with proven ELGO Measuring Systems
- Wearfree alternative to conventional linear measuring systems
- Based on the series LMIX / EMIX
- Also in combination with the battery-powered position indicators IZ15E and IZ16E possible
- Sensor head and magnetic tape integrated
ELGO PNO SSI – PROFIBUS Converter
Simple conversion from SSI to PROFIBUS
- Up to 1,200 m cable length
- Transmission rate up to 12 MBaud
- Easy assembly due to assembly slots
- Even for older ELGO devices
ELGO RMAX1 Absolute Single-Turn Encoder for Angle Measurement
For direct mounting on a shaft
- Small sensor
- Absolute measurement
- For usage with round magnet
- Resolution 12 bit per revolution
ELGO RMIX2 Incremental Measuring System
Measurement of Lengths, Positions, Angles and Rotational Speed
- For length and angle measuring
- Excellent cost effectiveness
- Resolution up to 0.025 mm (at 4-edge triggering)
- Very robust against dirt
ELGO Safe Box – Electronic evaluation unit, SIL3
Electronic evaluation unit, SIL3
Safe Box is an extension of the redundant absolute shaft information systems LIMAX3R and LIMAX4R.
ELGO Z25 1-Axis Position Indicator / Counter
Extensively programmable Pulse Counter for 1 axis
- Position indicator with signal input for 1 axis
- Suitable for conventional rotary and linear encoder and for incremental and absolute ELGO measuring systems
- Adjustable reference value, too offset and saw blade width
- LCD Display with 7 digits, sign and measurement unit
ELGO Z50 1-Axis Position Indicator / Counter
Versatile 1-axis Position Indicator with serial interface via USB
- Connection to incremental and absolute measuring systems
- Actual value memory
- 7-digit LCD-display, digit height 14 mm
- 2 digital inputs
ELGO Z51/Z52 simple Position indicator for 1 or 2 axes
In solid aluminium built-on housing
- Simple digital position display for incremental HTL encoders or ELGO sensors (e. g. LMIX, EMIX, GMIX, KMIX, SMIX, RMIX, PMIX)
- Single axis (Z51) or dual axis (Z52) variant available
- Aluminium built-on housing for mounting on a surface
- 10 mm high LED display (7 digits resp. 6 digits + sign)
ELGO Z57 1 Axis Position Indicator / Preset Counter
Preset Counter with 2 Presets and Changeover Output Relays
- Easy handling
- External set / reset/ inhibit inputs
- Digital brightness control
- Extensive programmable output performance
ELGO Z58 1 Axis Position Indicator / Preset Counter
Preset Counter for Incremental and Absolute Measuring Systems
- Processes incremental and absolute signals
- RS232 interface
- Power down memory
- Scaling factor and edge multiplier
ELGO Z60 3 Axes Position Indicator / Counter
Programmable Universal Position Indicator for 3 axes
- Position indicator with signal inputs for 1 up to 3 axes
- Inputs for conventional encoders as well as for ELGO measuring systems (incremental or absolute)
- Adjustable reference value, tool-offset and saw blade thickness
- Digital control input (configurable) for each axis
ELGO Z60-014 Quasi-absolute Measuring- and Display System
For monitored manual adjustments of 1, 2 or 3 axes
- Up to 3 axes at a glance during manual axis adjustment: Switchable display of actual position, target position and delta
- Due to the internal accumulator, the actual position is detected permanently (even in de-energized condition)
- Well legible graphical LCD with units & symbols, e. g. directional arrows and sign for indicated positions
- Specific parameters for each axis separately programmable, e. g. offset, tolerance window and measurement unit
ELOBAU Acoustic conduit
Acoustic conduit
ELOBAU Actuation lever
- The actuating lever ideally complements the angle sensors, giving increased flexibility in connecting the angle sensor in your application
- The operating lever can be combined with almost all angle sensor variants of elobau
ELOBAU Actuator 122MBV
The magnetic actuator was designed especially for use in the process area of food and packaging machines.
ELOBAU Actuator 153EBK001
Actuator for safety sensors of eloProtectE series 153ESK….
ELOBAU Actuator 153MBK
When used with the corresponding safety sensor, the magnetic actuator of the new eloProtect M range enables optimised operating distances and offset values as well as increased tampering protection.