DOLD UG 9146 – Sensorless Standstill Monitor
Sensorless Standstill Monitor
- Fast reaction time
- Easy to retrofit
- No external sensors necessary
You are here:
All products
7376 products
DOLD UG 9256 – Smart motorstarter
Smart motorstarter
- Up to 6 function in one unit- Reversing anticlockwise- Reversing clockwise- Softstart- Softstop- Current monitoring or motor protection- Galvanic separation via forcibly guided contacts contact distance min. 0.5 mm
- 80 % less space
- Simple and time-saving commissioning as well as user-friendly operation through setting via potentiometers on absolute scales
- Blocking protection
- Hybrid relay combines benefits of relay technology with non-wearing semiconductor technology
DOLD UG 9256/804 – Smart motorstarter with autom. phase sequence correction
Smart motorstarter with autom. phase sequence correction
- Up to 4 functions in one unit- Providing clockwise phase sequence at the motor connection terminals- Phase failure detection- Motorprotection Class 10 A, Class 5- Softstart
- Galvanic mains separation by forcibly guided contacts contact opening min. 0.5 mm (UG 9256/807)
- 66 % less space
- Simple and time-saving commissioning as well as user-friendly operation through setting via potentiometer on absolute scale
- Hybrid relay combines benefits of relay technology with non-wearing semiconductor technology
DOLD UG 9256/807 – Smart motorstarter with autom. phase sequence correction
Smart motorstarter with autom. phase sequence correction
- Up to 4 functions in one unit- Providing clockwise phase sequence at the motor connection terminals- Phase failure detection- Motorprotection Class 10 A, Class 5- Softstart
- Galvanic mains separation by forcibly guided contacts contact opening min. 0.5 mm (UG 9256/807)
- 66 % less space
- Simple and time-saving commissioning as well as user-friendly operation through setting via potentiometer on absolute scale
- Hybrid relay combines benefits of relay technology with non-wearing semiconductor technology
DOLD UG 9400 – Multifunction measuring relay, for Modbus
Multifunction measuring relay, for Modbus
- Simple parameterization, monitoring and diagnosis
- Compact design
- Simultaneous monitoring of up to 9 measured variables
- Large measuring range 3 AC 24 … 690 V
- Min-, Max-value or window monitoring
DOLD UG 9410 – Smart motorstarter, for Modbus
Smart motorstarter, for Modbus
- Widely used measuring and automation protocol
- Up to 7 functions in one device- Reversing anticlockwise,- Reversing clockwise- Softstart- Softstop- Motor protection- Phase sequence monitoring- Phase failure monitoring- Communication monitoring
- 80 % less space
- Simple and time-saving commissioning as well as user-friendly
- Operation through parameterization via modbus
DOLD UG 9411 – Smart motorstarter, for Modbus
Smart motorstarter, for Modbus
- Up to 6 functions in one device- Reversing anticlockwise,- Reversing clockwise- Softstart- Softstop- Motor protection- Phase failure monitoring- Communication monitoring
- Widely used measuring and automation protocol
- 80 % less space
- Simple and time-saving commissioning as well as user-friendly
- Operation through parameterization via modbus
DOLD UG 9431 – DC voltage relay, for Modbus
DC voltage relay, for Modbus
- Simple parameterization, monitoring and diagnosis
- Compact design
- Large measuring range DC 20 … 1000 V
- Min-, Max-value or window monitoring
- Early detection of irregularities
DOLD UG 9443 – Mains frequency monitor, for Modbus
Mains frequency monitor, for Modbus
- Simple parameterization, monitoring and diagnosis
- Compact design
- Universal measuring input for AC voltages from AC 24 … 690 V
- Auxiliary voltage ranges AC/DC 24 … 240 V
- Early detection of irregularities
DOLD UG 9460 – Input- / Output module digital, for Modbus
Input- / Output module digital, for Modbus
- Widely used measuring and automation protocol
- Compact structure
- Easy installation
- Easy appliance
- Pluggable clamps
DOLD UG 9461 – Input- / Output module analogue, for Modbus
Input- / Output module analogue, for Modbus
- Widely used measuring and automation protocol
- Compact structure
- Easy installation
- Easy appliance
- Pluggable clamps
DOLD UG 9831 – DC voltage relay
DC voltage relay
- Preventive maintenance
- For better productivity
- High repeat accuracy
- Wide measuring range DC 20 … 1000 V
- Easy setting
DOLD UH 3096 – Interface module
Interface module
- According to IEC/EN 60947-5-1
- Simple contact multiplication and reinforcement also for safety modules
- Cost and space saving alternative compared to contactors
- Easy monitoring of contact state via forcibly guided NC contacts
DOLD UH 5892 – Insulation monitor
Insulation monitor
- Preventive fire and system protection
- Insulation monitoring of DC voltage systems up to 600 V nominal voltage
- No additional coupling device required
- Suitable for leakage capacitances up to 20 μF
- Monitoring also with voltage-free mains
DOLD UH 5947 – Speed and standstill monitor
Speed and standstill monitor
- Three in one- Safe speed monitoring in automatic and set up operation- Safe standstill monitoring- Safe integrated gate monitoring
- For safety applications up to PL e / Cat 4 and SIL 3
- Space and costsaving, no external safe gate monitoring required
- Simple and time saving setup without PC
- Comfortable, menu guided configuration via frontside display
DOLD UH 6900 GC/GR – Radio controlled safety module (Group mode)
Radio controlled safety module (Group mode)
- Higher safety in dangerous areas
- More efficiency and economy by wireless communication
- Compact, easy to install devices
- DIN rail mounting
- Removable terminal blocks
DOLD UH 6900 MF – Radio controlled safety module (Pair mode)
Radio controlled safety module (Pair mode)
- Higher safety in dangerous areas
- More efficiency and economy by wireless communication
- Compact, easy to install devices
- DIN rail mounting
- Removable terminal blocks
DOLD UH 6932 – Speed monitor
Speed monitor
- For safety applications up to PL e / Cat. 4 and SIL 3
- Simple and time saving setup without PC
- Comfortable, menu guided configuration via frontside display
- Reducing interruption time in production by extensive diagnostic functions
- Easy to integrate in existing drive applications
DOLD UH 6937 – Speed and frequency monitor
Speed and frequency monitor
- For safety applications up to PL e / Cat. 4 and SIL 3
- Simple and time saving setup without PC
- Comfortable, menu guided configuration via frontside display
- Reducing interruption time in production by extensive diagnostic functions
- Easy to integrate in existing drive applications
DOLD UH 9830 – Battery symmetry monitor
Battery symmetry monitor
- Preventive maintenance
- For better productivity
- High repeat accuracy
- Large battery voltage ranges up to DC 1000 V
- Easy setting
DOLD UP 5862 – Test and Indication Panel
Test and Indication Panel
DOLD UP 5864 – Test and Indication Panel
Test and Indication Panel
- Simple and easy to recognise signalling of mains status for applications according to DIN VDE 0100-710
- Audible and visible alarm
DOLD V – Padlock module
Padlock module
- EU-Test certificate according to the directive 2006/42/EG, annex IX
- For safety applications up to PLe/Category 4 according to EN/ISO 13849-1
- Modular and expandable system
- Rugged stainless steel design
- Wireless mechanical safeguarding
DOLD V/K – Padlock module
Padlock module
- EU-Test certificate according to the directive 2006/42/EG, annex IX
- For safety applications up to PLe/Category 4 according to EN/ISO 13849-1
- Modular and expandable system
- Rugged stainless steel and plastic design
- Wireless mechanical safeguarding