| Brand | DOLD |
|---|---|
| Housing width | 22.5 mm |
| Phases | 3 |
| Order number | 0067521 |
You are here:
DOLD UG 9410 – Smart motorstarter, for Modbus
- Brand
- DOLD
- Part number
- UG 9410
- Order number
- 0067521
Smart motorstarter, for Modbus
- Widely used measuring and automation protocol
- Up to 7 functions in one device- Reversing anticlockwise,- Reversing clockwise- Softstart- Softstop- Motor protection- Phase sequence monitoring- Phase failure monitoring- Communication monitoring
- 80 % less space
- Simple and time-saving commissioning as well as user-friendly
- Operation through parameterization via modbus
Download datasheet (PDF)Ask an engineer
Price and lead time on request — add this part to your quote list and we will reply with pricing and availability.
The smart motorstarter UG 9410 can be used for softstart, softstop, reversing and protecting 3 phase asynchronous motors. By measuring the line current a thermal model is used to calculate the motor temperature, and in the case of overtemperature the motor is disconnected. In addition also a thermo switch can be used. The reversing is done via relays. The relays are switched without current flow, this provides long service life.
Features
- According to IEC/EN 60947-4-2
- Modbus RTU-interface
- To reverse 3 phase motors up to 0.18 kW … 2.2 kW at 400 V
- 2-phase softstart, softstop
- 3 potentiometer for setting the modbus adress and baud rate
- 5 LEDs for status indication
- Reversing with relays without current, softstart, softstop with thyristor
- Galvanic separation between control circuit and power circuit
- Width: 22.5 mm
Technical specifications
| 1- / 3-phase | 3 |
|---|---|
| Auxiliary voltage | DC 24 V |
| Bus interface | Modbus RTU |
| Load current up to | 5 A |
| Load voltage up to | 3AC 200 – 480 V |
| Temperature monitoring | Yes |
| Width | 22,5 mm |
| Type | UG 9410 |
Available variants
| Nominal current | 5 A |
|---|---|
| Nominal voltage | 3AC 200 – 480 V |
| Ramp time | 0 – 10 s |
| Terminal type | plug in mixed terminals |
Tell us the variant you need in your quote request.
