| Brand | DOLD |
|---|---|
| Housing width | 45 mm |
| Order number | 0068407 |
You are here:
DOLD BA 9034N/802 – Motor brake relay
- Brand
- DOLD
- Part number
- BA 9034N/802
- Order number
- 0068407
Motor brake relay
- Higher safety level and more economic by short stopping cycle
- Cost saving
- Compact design
- Easily appliance, no need for current measuring instrument
- Regulated braking current
Download datasheet (PDF)Ask an engineer
Price and lead time on request — add this part to your quote list and we will reply with pricing and availability.
The supply voltage is connected to terminals L1-L2 and the interlock contact X5-X6 closes to enable the motor contactor. A green LED indicates operation. The motor can be started with the start button. The braking DC-voltage is generated on terminals T1 and T2. The braking sequence is as follows: When contact X3/X4 closes, the braking contactor is switched on after a safety time has elapsed for the duration of the braking time and the braking current flows through the stator winding. Opening contact X3/X4 ends the braking process. The maximum possible braking time is 31 s resp. 11 s.
Features
- According to IEC/EN 60947-4-2
- For all single and 3-phase asynchronous motors
- DC-brake with one way rectification up to max. 32 Aeff
- Controlled by microcontroller
- Easily fitted to existing installations
- Wear free and maintenance free
- Integrated braking contactor
- DIN-rail mounting
- Adjustable braking current (controlled current)
- Width: 45 mm
Technical specifications
| Braking current adjustable up to max. | 32 A |
|---|---|
| Braking time adjustable up to max. | 31 s |
| Signalling output | Yes |
| Width | 45 mm |
| Type | BA 9034N/802 |
Available variants
| Braking current | 10 A · 25 A |
|---|---|
| Braking time | 2 – 31 s |
| Contact equipping | 1 changeover contact |
| Nominal voltage | AC 400 V |
| Approvals and Markings | UKCA |
| Variant | Without standstill detection. Adjustable braking current. Braking controllable via terminals X3/X4 |
Tell us the variant you need in your quote request.
