You are here:

All products

7376 products

Showing 697–720 of 7376 results

DOLD UF 6925 – Emergency stop module

DOLD UF 6925 – Emergency stop module

Cat./PL 4/eSIL 317.5 mm

Emergency stop module

  • For safety applications up to PL e / Cat. 4 e.g. SIL 3
  • Space saving
  • Connection front side
  • Manual or automatic start
  • Can be used also for safety gate
DOLD UG 3076/007 – Interface relay

DOLD UG 3076/007 – Interface relay

22.5 mm

Interface relay

  • According to IEC/EN 60947-5-1
  • Reliable fast response
  • Simple contact multiplication
  • Cost and space saving alternative compared to contactors
  • With plugable terminal blocks for easy exchange of devices
DOLD UG 3088 – Interface module

DOLD UG 3088 – Interface module

22.5 mm

Interface module

  • According to IEC/EN 60947-5-1
  • Economic and space safing because of 2 separate interface modules in one enclosure
  • Simple contact multiplication and reinforcement – also of safety modules
  • Cost and space saving alternative compared to contactors
  • Simple contact monitoring by forcibly guided contacts
DOLD UG 3091 – Interface module

DOLD UG 3091 – Interface module

22.5 mm

Interface module

  • Simple contact multiplication and reinforcement also for safety modules
  • Cost and space saving alternative compared to contactors
  • Easy monitoring of contact state via forcibly guided NC contacts
DOLD UG 3096 – Interface module

DOLD UG 3096 – Interface module

22.5 mm

Interface module

  • According to IEC/EN 60947-5-1
  • Simple contact multiplication and reinforcement also for safety modules
  • Cost and space saving alternative compared to contactors
  • Easy monitoring of contact state via forcibly guided NC contacts
DOLD UG 5122 – Diode module

DOLD UG 5122 – Diode module

22.5 mm

Diode module

  • Protects up to 8 contacts when switching inductive DC loads
  • High dielectric strength
  • Ready for mounting in switching cabinets
  • Pluggable clamps allow a fast module change
  • Unique design with UG- switching devices
DOLD UG 5124 – Trip circuit monitor

DOLD UG 5124 – Trip circuit monitor

22.5 mm

Trip circuit monitor

  • Wide auxiliary voltage range DC 20 … 265 V
  • Limiting of the power consumption at measuring circuit by a voltage independent constant current source
  • On delay- / release delay each adjustable
DOLD UG 6912.04 – Output module OSSD

DOLD UG 6912.04 – Output module OSSD

Cat./PL 4/eSIL 322.5 mm

Output module OSSD

  • For safety applications up to PLe, Cat. 4 and SIL 3
  • Less wiring because of configuration software SAFEMASTER PRO Designer
  • Easy planning because of Drag & Drop via graphic configuration software
  • Time and cost saving installation
  • Reduced wiring and space saving in cabinets
DOLD UG 6912.14 – Output module relay

DOLD UG 6912.14 – Output module relay

Cat./PL 4/eSIL 322.5 mm

Output module relay

  • For safety applications up to PLe, Cat. 4 and SIL 3
  • Less wiring because of configuration software SAFEMASTER PRO Designer
  • Easy planning because of Drag & Drop via graphic configuration software
  • Time and cost saving installation
  • Reduced wiring and space saving in cabinets
DOLD UG 6912.28 – Output module relay

DOLD UG 6912.28 – Output module relay

Cat./PL 4/eSIL 322.5 mm

Output module relay

  • For safety applications up to PLe, Cat. 4 and SIL 3
  • Less wiring because of configuration software SAFEMASTER PRO Designer
  • Easy planning because of Drag & Drop via graphic configuration software
  • Time and cost saving installation
  • Reduced wiring and space saving in cabinets
DOLD UG 6913.16 – Input module

DOLD UG 6913.16 – Input module

Cat./PL 4/eSIL 322.5 mm

Input module

  • For safety applications up to PLe, Cat. 4 and SIL 3
  • Less wiring because of configuration software SAFEMASTER PRO Designer
  • Easy planning because of Drag & Drop via graphic configuration software
  • Time and cost saving installation
  • Reduced wiring and space saving in cabinets
DOLD UG 6914.04/008 – Output module relay

DOLD UG 6914.04/008 – Output module relay

Cat./PL 4/eSIL 322.5 mm

Output module relay

  • For safety applications up to PLe, Cat. 4 and SIL 3
  • Less wiring because of configuration software SAFEMASTER PRO Designer
  • Easy planning because of Drag & Drop via graphic configuration software
  • Time and cost saving installation
  • Reduced wiring and space saving in cabinets