You are here:

All products

7376 products

Showing 817–840 of 7376 results

ELGO CMAX2 absolute miniature measuring system

ELGO CMAX2 absolute miniature measuring system

Extremely compact, flat & light

  • Space- and weight-saving installation solution
  • Magnetic absolute measurement with up to 20 bit resolution
  • Communication via BiSS-C or SSI
  • Additional incremental output signals (ABZ quadrature signals, 5 V TTL)
ELGO CMIX3 programmable measuring system

ELGO CMIX3 programmable measuring system

HIGH RESOLUTION & SUPER FAST & SMART

  • High resolution – up to 16 nm (X4 encoding)
  • Super fast – high output frequency of 32 MHz (counts/s)
  • Smart – customer-specific functions can be retrofitted by software add-ons
  • Fexible – parameters such as resolution, index pulse width, hysteresis, etc. can be configured via cable even after installation
ELGO DMIX3

ELGO DMIX3

Contactless measuring with up to 10 mm reading distance

  • Large reading distance tolerance for maximum operational reliability (0.1 … 10.0 mm)
  • Robust magnetic technology for harsh industrial environments
  • Easy installation, even in confined spaces
  • Freely selectable reference pulse
ELGO Elastomer-based magnetic-rings

ELGO Elastomer-based magnetic-rings

Radial and axial versions in different diameters

  • Incremental or absolute magnetic rings
  • In radial (MRR) or axial (MRA) design
  • Thanks to protection class IP68 predestined for outdoor use
  • Resistant to thermal, chemical and mechanical influences
ELGO EMAX | EMAL absolute measuring system

ELGO EMAX | EMAL absolute measuring system

Robust linear measuring systems with LED distance detection

  • Absolute measuring
  • Resolution 0.01 mm
  • No calibration necessary – changes of position are also recognized in zero-current period
  • With LED and SSI error-bit in case of too large distance sensor-tape
ELGO EMAX encoders with IO-Link

ELGO EMAX encoders with IO-Link

Magnetic absolute measuring system with integrated io-link interface

  • Integrated IO-Link interface
  • Absolute measurement with 10 µm resolution
  • Non-contact measuring principle
  • Up to 10 m measuring length (EMAX) or 20 m (EMAL)
ELGO EMAX-HI Absolute Measuring System

ELGO EMAX-HI Absolute Measuring System

Magnetic high-resolution linear encoder for dynamic processes

  • High-resolution – up to 1 µm
  • Operation speed up to 10 m/s
  • For measuring lengths up to 8 m
  • Standard interfaces: SSI, CANopen (DS406) on request: RS422, CAN BASIC ELGO or BiSS-C
ELGO EMIX1 | EMIX2 Incremental Measuring Systems

ELGO EMIX1 | EMIX2 Incremental Measuring Systems

Compact Measuring Systems for linear and radial measurements

  • Resolution 0.01 mm (at 4-edge triggering)
  • Repeat accuracy ± 0.001 mm
  • Speed-proportional output of square-waves signals
  • small sensor head with external electronic interpolation
ELGO EMIX23 Incremental measuring System

ELGO EMIX23 Incremental measuring System

Precise Linear Encoder with 0,001 mm resolution

  • High resolution sensor technology (1µm)
  • Resolution 0.001 mm (at 4 edge triggering)
  • Repeat accuracy ± 0.001 mm
  • Speed-proportional square wave outputs
ELGO end caps

ELGO end caps

Optimal protection for magnetic tapes

  • Optimale protection against the peel off of the magnetic tape / cover tape
  • Reduce the hazard of injury by sharp edges
ELGO FMAX2 | FMAX3

ELGO FMAX2 | FMAX3

Ideally suited for motorfeedback

  • magnetic absolute measurement with up to 19 bit resolution – linear or rotary
  • ideal for motor feedback systems
  • two versions for different measuring lengths (FMAX2: 192 mm / FMAX3: 240 mm or diameter (FMAX2 ∅ 61 mm, FMAX3 ∅ 80 mm)
  • additional incremental output signals (HTL, TTL or SIN/COS) optionally available
ELGO GSA2 Guided Linear Encoder Unit

ELGO GSA2 Guided Linear Encoder Unit

Magnetic absolute linear measuring system – high resolution

  • Absolute measurement
  • High quality guide car with integrated sensor, guide rail with magnetic tape
  • For measuring lengths up to 1 meter
  • High resolution (1 µm)
ELGO GSI2 Guided Linear Encoder Unit

ELGO GSI2 Guided Linear Encoder Unit

Guided Linear Unit with Incremental Encoder e. g. for press brakes

  • Free adjustable index impulse
  • Max. resolution of 0.001 mm* (at 4-edge triggering)
  • Power supply / signal level 5 V or 10-30 V
  • Differential signals / reference plus
ELGO GSI6

ELGO GSI6

Magnetic Linear Encoder with Precision Guiding Unit

  • For high‑precision positioning (magnetic tape with 2 mm pole pitch)
  • Robust precision guiding unit ensures consistently accurate motion sequences
  • Freely selectable reference point
  • Adapter bracket for flexible machine installation
ELGO Guide Carriage

ELGO Guide Carriage

Suitable for Guide Rail and various Measuring Systems

  • Made of special sliding plastic
  • For the assembly of sensors
  • Different sizes available
ELGO Guide rail

ELGO Guide rail

Aluminium Guide Rail for Magnetic Tapes

  • Aluminium guide rail, 25 mm wide, 6 mm high
  • For 10 and 20 mm magnetic tape
  • Slot on both sides (1 x 10 mm, 1 x 20 mm) for magnetic tape
  • Lengths up to 2 meters