DOLD BN 3081 – Extension module
Extension module
- Safety contact multiplication
You are here:
All products
7376 products
DOLD BN 5930.48 – Emergency stop module
Emergency stop module
DOLD BN 5930.48/203 – Emergency stop module
Emergency stop module
- Can be used for long leads in the e-stop loop. This allows a long distance between e-stop module and the e-stop button.
- Crossfault detection in the e-stop circuit
DOLD BN 5930.48/204 – Emergency stop module
Emergency stop module
- Can be used for long leads in the e-stop loop. This allows a long distance between e-stop module and the e-stop button.
- Crossfault detection in the e-stop circuit
DOLD BN 5983 – Emergency stop module
Emergency stop module
DOLD BN 9011 – Softstarter
Softstarter
- Increases the life of squirrel cage motors and mechanical drives
- Easily fitted to existing installations
- No neutral conductor required
- For snapping onto 35 mm standard top-hat rail
- For simple applications, the f/U converter can often be dispensed with
DOLD BN 9034 – Motor brake relay
Motor brake relay
- Higher safety and economic efficiency due to shorter run-out times
- Easy to fit also into existing control circuits
- Wear and maintenance free
- Can be used on all asynchronous motors
- Adjustable braking current
DOLD BO 5988 – Emergency stop module
Emergency stop module
DOLD C – Actuator with 3 degrees of flexibility
Actuator with 3 degrees of flexibility
- EU-Test certificate according to the directive 2006/42/EG, annex IX
- For safety applications up to PLe/Category 4 according to EN/ISO 13849-1
- Modular and expandable system
- Rugged stainless steel design
- Wireless mechanical safeguarding
DOLD CA 3056 – Interface relay
Interface relay
- As option goldplated contacts (5 μm Au) to switch low loads
- CA 3056 and CB 3056: Protective separation acc. to IEC/EN 61140, IEC/EN 60947-1: 6 kV / 2
DOLD Cable with connectors
- • Simple and fail safe module connection• Without wiring• Saves time and cost when mounting• Allows easy exchange of modules
DOLD CB 3056 – Interface relay
Interface relay
- As option goldplated contacts (5 μm Au) to switch low loads
- CA 3056 and CB 3056: Protective separation acc. to IEC/EN 61140, IEC/EN 60947-1: 6 kV / 2
DOLD CB 3057 – Interface relay
Interface relay
- Test possible without influence on PLC
DOLD CC 3056 – Interface relay
Interface relay
- As option goldplated contacts (5 μm Au) to switch low loads
- CA 3056 and CB 3056: Protective separation acc. to IEC/EN 61140, IEC/EN 60947-1: 6 kV / 2
DOLD CK – Coded Actuator with 3 degrees of flexibility
Coded Actuator with 3 degrees of flexibility
- EU-Test certificate according to the directive 2006/42/EG, annex IX
- For safety applications up to PLe/Category 4 according to EN/ISO 13849-1
- Modular and expandable system
- Rugged stainless steel design
- Wireless mechanical safeguarding
DOLD CKS – Coded Actuator with sliding bolt
Coded Actuator with sliding bolt
- EU-Test certificate according to the directive 2006/42/EG, annex IX
- For safety applications up to PLe/Category 4 according to EN/ISO 13849-1
- Modular and expandable system
- Rugged stainless steel design
- Wireless mechanical safeguarding
DOLD CS – Actuator with sliding bolt
Actuator with sliding bolt
- EU-Test certificate according to the directive 2006/42/EG, annex IX
- For safety applications up to PLe/Category 4 according to EN/ISO 13849-1
- Modular and expandable system
- Rugged stainless steel design
- Wireless mechanical safeguarding
DOLD CW – Bolt actuator
Bolt actuator
- EU-Test certificate according to the directive 2006/42/EG, annex IX
- For safety applications up to PLe/Category 4 according to EN/ISO 13849-1
- Modular and expandable system
- Rugged stainless steel design
- Wireless mechanical safeguarding
DOLD D – Actuator module
Actuator module
- EU-Test certificate according to the directive 2006/42/EG, annex IX
- For safety applications up to PLe/Category 4 according to EN/ISO 13849-1
- Modular and expandable system
- Rugged stainless steel design
- Wireless mechanical safeguarding
DOLD D/K – Actuator module
Actuator module
- EU-Test certificate according to the directive 2006/42/EG, annex IX
- For safety applications up to PLe/Category 4 according to EN/ISO 13849-1
- Modular and expandable system
- Rugged stainless steel and plastic design
- Wireless mechanical safeguarding
DOLD E – Actuator module
Actuator module
- EU-Test certificate according to the directive 2006/42/EG, annex IX
- For safety applications up to PLe/Category 4 according to EN/ISO 13849-1
- Modular and expandable system
- Rugged stainless steel design
- Wireless mechanical safeguarding
DOLD EC 7610 – Timer, On-delay
Timer, On-delay
- Large setting range
- Simple unit setting
- Purely mechanical timing
DOLD EC 7616 – Timer, On-delay
Timer, On-delay
- Large setting range
- Simple unit setting
- Purely mechanical timing
DOLD EC 7666 – Timer, Off-delay
Timer, Off-delay
- Large setting range
- Simple unit setting
- Purely mechanical timing